Established in 1992, China Fenglie Machinery Co., Ltd. are one of China sherline lathe manufacturer and supplier and specialize in the production of a range of machine and equipment. We has obtained ISO9001 certification and CE, GS and EMC approvals. With the support of first class equipment, advanced production technique and standardized inspection process, our customized machinings products gains a good selling over not only domestic market, but also overseas markets.

1/2" 5 PCS INDEXABLE C6 CARBIDE TIP TURNING TOOL BRAND NEW IN FITTED STAND!Description: 5 pieces set 1/2" Shank FIVE TCMT INSERTS, C6 CARBIDE! Style included: AR - right hand, AL - left hand, BL - left hand 15 angle, BR - right hand 15 angle, style E - threading tool 30 angle 2 each Style A, 1 Left, 1 Right for Turning, Facing, Boring, and Chamfering 2 each Style B, 1 Left, 1 Right for Turning, Facing, Boring or whatever a lead angle can be used 1 each Style E, for Turning, Facing, Boring, Chamfering, Threading and "V" Grooving Build-in chipbreaker groove Positive rake cutting action. (The box cannot calculate between measurement systems but must be initialized to read the proper leadscrew pitch.) Also included is an RPM sensor and continuous readout of RPM on the display. Includes 120 V power supply and all necessary hardware for installation. No hole drilling is necessary for installation. Works with Sherline tools only. Also includes steady rest, live center, cut-off tool and holder, 3 pc. HSS cutting tool set, hex t-driver, center drill set, compound slide, thread cutting attachment and Sherline Accessories Shop Guide book.

Helps eliminate mistakes due to losing track of handwheel revolutions on long dimensions
Reset any dimension to zero at any time with the push of a button
Reads to .0005 or .01 mm increments
Constant spindle RPM readout also provided
120 VAC power supply
Almost no accessory has gained such popularity in machine shops in the past decade or so as the digital readout. By keeping track of table movement electronically on an easy-to-read LCD display it is much easier to enter long dimensions accurately. No more counting handwheel revolutions. Just push a button to zero the display, and turn the handwheel until your desired stopping point is reached. Unlike more expensive DROs that measure table movement using etched glass scales and optical sensors, the Sherline DRO measures handwheel (leadscrew) rotation and translates that into a linear dimension electronically. Because Sherline uses precision rolled leadscrews that are very accurate and because travels are short on a machine of this type, this system works very well and keeps cost down. The readout displays to 3-1/2 decimal places (.0005) on inch setting and to .01 mm on metric setting.

Also you can visit China Machinery Manufacturer Catalog or China Machinery Products Catalog to find more China Products!