Established in 1992, China Fenglie Machinery Co., Ltd. are one of the rolling machine manufacturer and designer in China and specialize in the production of a range of machine. We has obtained ISO9001 certification and CE, GS and EMC approvals. With the support of first class equipment, advanced production technique and standardized inspection process, our custom rolling machines products gains a good selling over not only domestic market, but also overseas markets, such as USA, UK, France, Amercia, Russia, Europe, the Middle East, Africa and South America.

A round of surface electroplates a layer of chromium in the pressure roller, high hardness and low wear.Fast rolling work, but different thickness of workpiece or internal diameter, need exclusive roller tube.A group of pressure roller tube support the device, adjust support board position manually, it is a (V) form to support board, can contact the internal diameter of the roller tube.The rolling platen adjustable level and distance position, there is a hidden switch, can start automatically rolling.A group of pressure roller tube support the device, adjust support board position manually, it is a (V) form to support board, can contact the internal diameter of the roller tube.The rounding roller round surface covers the rubber material, flexible and not easy damage of elasticity, do not need oil to lubricate.Rounding roller,s pressurization is that the hydraulic pressure drive, use the parallel pole to move and pressurize in step.

Simple design of the machine and low operation noise level is the main feature of this machine series. Hard metal and phosphor bronze bearing are set on the sliding surfaces between main slide and bed frame. Its clearance is adjustable only by adjusting the cover plate on the top after years of operation. Forward and backward push buttons together with foot brake will enable operator to do quick set-up. Set up time will be greatly shortened by applying a starting line on the top of moving die and the set-up will be reached by turning a pinion gear set on the flywheel eccentric wheel . Moving die is set up on die pocket on main lide. It is recommended not to use horizontal stay bolt just to avoid damaging many parts when blanks are rolled backward instead of falling down.