Established in 1992, China Fenglie Machinery Co., Ltd. are one of the polishing machine manufacturer and designer in China and specialize in the production of a range of machine. We has obtained ISO9001 certification and CE, GS and EMC approvals. With the support of first class equipment, advanced production technique and standardized inspection process, our custom polishing machines products gains a good selling over not only domestic market, but also overseas markets, such as USA, UK, France, Amercia, Russia, Europe, the Middle East, Africa and South America.

Designated the LLCD series, a typical machine consists of a heavy duty, structural steel base housing a drive system linked to a lapping plate. A polishing pad (type dependent on material to be processed) is bonded directly to the plate. A swing arm assembly positioned above the polishing surface is mounted to a swivel head workpiece pressure plate. Workpieces of varying geometries can be retained by surface tension, wax or vacuum to the pressure plate. The pressure plate is designed to swivel up from the horizontal position to facilitate load and unload operations. Adjustable stroke on the swing arm assembly enables the pressure plate to sweep across the polishing surface. This unique combination of rotating polishing plate and
Heavy duty structural steel base. Variable speed range. Soft start to prevent workpiece damage. Precision slurry distribution system and agitator. Standard 460 volts, 60 hz, 3 ph electrics with 110 v operator controls, machines to suit other electrical supplies are available.

MP-1 Single Unit dual speed Metallurgical Preparation Grinder/Polisher can be used to prepare grind,pre-grind and polish.Once changing grind/polish unit,it can do all kinds of preparation work.MP-1 operates steadily in low noise,easily change speed and grind/polish units.The sizes of units are larger than the same products in China,so it can increase work area to 20-30%.MP-1 can be installed with PD-1 Polisher to become a versatile auto polisher.MP-1 is the best choice for metallurgical preparation.Customers are choose platen speed:500/1000rpm, 400/800rpm, 300/600rpm,200/400rpm. Grinding Wheel Unit Diameter:250mm. Grinding Disc Diameter:230mm. Polishing Wheel Unit Diameter:220mm. Abrasive Wheel Unit. Diameter:220mm. Platen Speed:500/1000rpm. Electromotor:YSD802-4/8 380V 50Hz.