Established in 1992, China Fenglie Machinery Co., Ltd. are one of China benchtop lathe manufacturer and supplier and specialize in the production of a range of machine and equipment. We has obtained ISO9001 certification and CE, GS and EMC approvals. With the support of first class equipment, advanced production technique and standardized inspection process, our customized machinings products gains a good selling over not only domestic market, but also overseas markets.

Motor: 1/2 HP, 110V, single-phase. Amps: 2. Swing over bed: 10". Distance between centers: 18". Tailstock travel: 3-1/4". Speeds: 826, 1205, 1713, 2422, 3337 RPM. Tool rest length: 6". Includes tool rest, live rolling center, spur center and wrenches. Overall dimensions: 33"L x 17"W x 12"H. Approximate shipping weight: 77 lbs. Cast-iron construction. Includes 6-inch tool rest, spare drive belt, 3-inch faceplate, live tailstock center, no. 2 Morse taper spur center. Weighs 78 pounds; 3-year warranty. The largest diameter piece you can turn on this lathe is 7-1/2 inches, and the longest piece you can turn is 12-1/2 inches – the distance between the centers on the headstock and tailstock. That leaves open a wide array of projects, limited only by the imagination. We were impressed, also, that this little machine comes with two tool rests: one is 4-1/2 inches, the other, 7 inches, along with a faceplate (used for turning plates, cups and bowls), a spur center, live tailstock center (rotates with the stock to reduce friction and, thus, heat), a knockout bar and wrench.

Size: Turns 3.5 diameter parts over the bed, 8 between centers
Includes 2.5" 3-Jaw and Jacobs drill chucks
48-page color instruction manual
One year warranty
Handwheels calibrated in .001" increments
Dovetailed machine slides with adjustable gibs for long-lasting accuracy, ground steel bed and cast base for rigidity, instrument quality finishes, laser engraved aluminum handwheels, precision rolled leadscrews, inch or metric calibrations available, powerful DC motor with electronic speed control, 70-2800 RPM range, two 20mm headstock bearings with adjustable preload, extra pulley position for high torque, rotating headstock for taper turning. Spindle has #1 Morse internal taper, ¾-16 external thread, .405 through hole. Includes faceplate, drive dog, tool post, ¼ right-hand HSS cutting tool, two dead centers, two chuck arbors and drawbolt, 4 hex adjustment keys and 2 spindle bars. Turn wood, plastic, brass, aluminum or steel (Stainless and Titanium with optional carbide tools) to tolerances of less than 1/1000. Made in USA. A Package includes 2.5 3-jaw chuck and ¼ Jacobs tailstock drill chuck. Save money compared to adding chucks separately.

Also you can visit China Machinery Manufacturer Catalog or China Machinery Products Catalog to find more China Products!